cic.com.vn
Công ty cổ phần công nghệ và tư vấn CIC
CIC Workshop: Applying OpenFlows Solutions for Secure, Safe, Efficient Water Industry...
15/11/2024
As part of promoting digital transformation in Quang Ninh Province's water sector, CIC Technology and Consulting Joint Stock Company and Bentley organized a workshop on "Applying OpenFlows Solutions" for Quang Ninh Clean Water Company. This was an opportunity for experts and Quang Ninh Clean Water Company to exchange, share experiences,...
View detail
CIC Implements Greenhouse Gas Inventory and EPD for Steel and Cement Industry...
25/10/2024
Entering Q4 2024, enterprises listed in the greenhouse gas inventory under Decision 01/2022 and Decision 13/2024 are gradually beginning to implement greenhouse gas emission inventories, with the goal of completing greenhouse gas inventory reports before March 2025 to meet Government requirements and establish a basis for developing emission reduction roadmaps....
View detail
Successfully organized the Seminar: Ansys Multi-Physics Simulation Solutions in Academia & Research
25/10/2024
On October 16 in Hanoi, CIC Technology and Consulting Joint Stock Company, in collaboration with Cadfem and Ansys, successfully organized the seminar "Ansys Multi-Physics Simulation Solutions in Academia Research Shaping the Future through Digital Simulation". The event attracted widespread participation Professors, PhDs, Lecturers, and Researchers leading universities and...
View detail
What is an Environmental Product Declaration (EPD)? Benefits and Implementation Process of...
14/10/2024
An Environmental Product Declaration (EPD) is a document that publicly discloses the environmental impacts of a product during its manufacture and use.
View detail
CIC excellently wins 2 Second prizes in the EVNGENCO2 Control Center design...
14/10/2024
CIC Technology and Consulting Joint Stock Company has achieved an admirable feat by winning two Second prizes in the Architectural Design Competition for the EVNGENCO2 Power Plant Operation and Monitoring Control Center (Headquarters of Power Generation Corporation 2 - JSC). The competition did not award a First prize.
View detail
Webinar: "BIM Process for Steel and Reinforced Concrete with IDEA StatiCa Solutions"...
02/10/2024
On September 27, 2024, CIC Technology and Consulting JSC in collaboration with IDEA Statica software company (Czech Republic) successfully organized an online seminar on "BIM Process for Steel and Reinforced Concrete with IDEA StatiCa Solutions". The seminar attracted over 250 participating organizations various fields including construction, project management, and design...
View detail
Application of Building Information Modeling in Urban Planning Management
18/09/2024
The Ministry of Construction is conducting research to develop a platform for applying Building Information Modeling (BIM) in urban construction planning management, construction management according to planning, and urban technical infrastructure management nationwide.
View detail
Applying Building Information Modeling (BIM) to Support Construction Project Appraisal
13/09/2024
On September 10th, the Construction Activity Management Department (Ministry of Construction) along with CIC Technology and Consulting Joint Stock Company held a conference to discuss and exchange information about the application of Building Information Modeling (BIM) in supporting the appraisal of construction investment projects.
View detail
Webinar N0.1: Applying Bentley Solutions in High-Speed Railway Design
26/08/2024
On August 23rd, 2024, CIC Technology and Consulting Joint Stock Company, in collaboration with TEDI, successfully organized the first webinar in the series: “APPLYING BENTLEY SOLUTIONS IN HIGH-SPEED RAILWAY DESIGN”. The webinar attracted a large number of railway engineers TEDI.
View detail
MagiCAD: A Comprehensive BIM Solution for Mechanical, Electrical, and Plumbing Engineering
23/08/2024
MagiCAD is a BIM MEP (Mechanical, Electrical and Plumbing) software developed by MagiCAD Group, now part of Glodon Asia International. Founded in 1983 in Finland, MagiCAD has over 40 years of experience in the BIM MEP field and provides comprehensive and professional software services.
View detail
CIC successfully organizes the second BIM ISO 19650 training course
19/08/2024
CIC Technology and Consulting Joint Stock Company (under the Ministry of Construction) successfully collaborated with the British Standards Institute (BSI) to organize the "BIM Specialist - BIM Expert Training Course in Compliance with ISO 19650 Standards." This marks the second BIM ISO 19650 training course hosted by CIC and BSI.
View detail
CIC and PTV Group work with Viettel Solutions on solutions for smart...
09/08/2024
Recently, CIC Technology and Consulting Joint Stock Company, together with representatives of PTV Group and experts the University of Transport, had a working session with representatives of Viettel Enterprise Solutions Corporation (Viettel Solutions) to share about the application of PTV solutions for smart traffic management and operation.
View detail
CIC successfully organized the online seminar: PIPENET global leader for fluid...
05/08/2024
On July 31, 2024, CIC Technology and Consulting Joint Stock Company in collaboration with Sunrise Systems Limited (UK) successfully organized an online seminar with the topic: PIPENET - global leader for fluid flow analysis.
View detail
Hanoi proactively applies BIM to construction investment projects
25/07/2024
According to the roadmap for applying Building Information Modeling (BIM) approved by the Prime Minister, Hanoi has entered the initial phase with a focus on training and workshops to resolve numerous obstacles for management units and investors. The goal is to enable stakeholders to proactively apply BIM in the implementation...
View detail
CIC successfully organized a webinar: Cage Carbon Software Cage CBAM on...
04/07/2024
On June 26, 2024, CIC Technology and Consulting Joint Stock Company successfully organized an online seminar with the topic: Cage Carbon - Cage CBAM software in inventorying greenhouse gas emissions and preparing CBAM documents - Tax European carbon”.
View detail
BIM competency certification program according to ISO 19650 Standard organized by CIC...
14/06/2024
BIM (Building Information Modeling) is becoming increasingly popular in the construction industry. To meet the increasing demands of the market, CIC Technology and Consulting Joint Stock Company organizes a BIM competency certification program according to ISO 19650 standards.
View detail
CIC awarded enjiCAD software copyright and accompanied the Career Orientation Day at...
14/06/2024
Recently, CIC Technology and Consulting Joint Stock Company awarded the copyright to enjiCAD software and accompanied the Career Orientation Festival at Ho Chi Minh City University of Technology.
View detail
Cage Carbon was introduced at the 7th International Scientific Conference and Exhibition...
13/05/2024
CAGE CARBON greenhouse gas inventory software was introduced at the 7th International Scientific Conference and Exhibition on Control and Automation (VCCA 2024).
View detail
CIC and PTV Group organized a workshop to introduce traffic software to...
03/05/2024
Recently, CIC Technology and Consulting Joint Stock Company and software company PTV Group organized a seminar to introduce the company's traffic software to Vietnamese-German University (VGU) - the first public international school. and the largest in Vietnam.
View detail
CIC launches the PYTHA CAD 3D interior design and manufacturing software training...
15/04/2024
The PYTHA CAD 3D interior design and manufacturing software training program will start on Thursday evening, April 25, 2024 on the online platform implemented by CIC Technology and Consulting Joint Stock Company.
View detail
A special seminar: "Growing Construction Industry Enterprises according to BIM Standards with...
09/04/2024
Technova & CIC are honor to invite you to participate in a special seminar on the collaboration values of Microsoft 365 and BIM management solution in Construction Industry for best operational optimization in Digital Transformation.
View detail
Foxit PDF Editor Suite V2024.1 – Upgraded version with many of the...
09/04/2024
Foxit software company has just released Foxit PDF Editor Suite V2024.1 - updated with many of Foxit's latest enhancements available on both Windows and Mac platforms.
View detail.jpg)
Don't miss the April event: Webinar CADWorx Complete solution for effective...
09/04/2024
On April 11, 2024, CIC Technology and Consulting Joint Stock Company and Hexagon Company jointly organized an online seminar with the topic CADWorx - Complete solution for effective factory design.
View detail
CSI launches upgraded version SAP2000 v25.2.0, CSiBridge v25.2.0
05/04/2024
CSI releases new versions SAP2000 v25.2.0 & CSiBridge v25.2.0 an update to the previous v25.1.0. The company also recommends that users upgrade to this latest version for stability and software improvements.
View detail
CIC Company become the official partner of SoftInWay in Vietnam
29/03/2024
In March 2024, CIC Technology and Consulting Joint Stock Company officially became a partner of SoftInWay Company (USA).
View detail
Transition PLAXIS LE and PLAXIS Designer to GeoStudio and Leapfrog software
22/03/2024
Seequent encourages users to plan a transition PLAXIS LE and PLAXIS Designer to GeoStudio and Leapfrog software. Detailed information will be in the article below.
View detail
Responding to Earth Hour 2024 - Towards Net zero 2050
15/03/2024
Earth Hour 2024 this year takes place on 23/3/2024, marking our first participation with the message of reducing carbon footprint – Heading towards net zero in the context of greenhouse gases warming up the earth.
View detail
CIC Honors Women in International Women's Day 8/3
15/03/2024
On March 8th, CIC Technology and Consulting Joint Stock Company organized a cozy party to celebrate and congratulate sisters on the occasion of International Women's Day.
View detail
Managing change when using IDEA StatiCa Connection
12/03/2024
One of the major problems with construction projects is the huge amount of wasted materials and time associated with poor communication, especially when related to change. How can this be improved? Read on...
View detail
CIC participates in the training program for Ansys partners in Malaysia
07/03/2024
During 2 days ( February 29 to March 1, 2024), CIC Technology and Consulting Joint Stock Company participated in the training program for Ansys partners in Kuala Lumpur (Malaysia), including ASEAN and ANZ ries.
View detail
Carbon credit market - Policies and roadmap for formation
01/03/2024
Experts had discussions and perspectives on policies and roadmaps for forming the carbon credit market in Vietnam right after the news that Vietnam successfully sold 10.3 million forest carbon credits through the World Bank. World Bank (WB) with a value of 51.5 million USD.
View detail
New releases: PLAXIS 2024.1
01/03/2024
Recently, Bentley officially released PLAXIS 2024.1, the latest version of its geotechnical and foundation analysis software with many new features and improvements for users.
View detail
Update digital transformation trends in 2024 and benefits that cannot be ignored...
28/02/2024
The wave of digital transformation is taking place strongly in all aspects, which is the reason why Vietnamese businesses need to immediately join this game.
View detail
CBAM mechanism is extended for another 30 days
22/02/2024
The Carbon Border Adjustment Mechanism (CBAM) has been extended for another 30 days, to March 1, 2024, due to ongoing system technical errors in the CBAM register.
View detail
Interior trends are on the rise in 2024
20/02/2024
According to Architectural Digest, the interior trend of 2024 is the rise of new colors such as peach orange and turquoise. In it, romanticism and classic beauty also return.
View detail
SimaPro - Product life cycle assessment software (Life Cycle Accessment - LCA)
06/02/2024
SimaPro has a comprehensive database of life cycle inventory (LCI) data containing data on thousands of materials and processes, making it easier to collect and analyze data throughout the product life cycle.
View detail
50 cement manufacturing enterprises must inventory greenhouse gas emissions
06/02/2024
The Ministry of Construction plans to inventory the greenhouse gases of 50 cement manufacturing enterprises to participate in the carbon credit trading market to green the economy, aiming for net zero emissions. .
View detail
SmartTrigger feature on PET (Pile Echo Test)
31/01/2024
SmartTrigger is an independent labor-saving feature of Piletest's PET (Pile Echo Test) device when testing powders.
View detail
PIPENET Spray/Sprinkler – free training webinar
31/01/2024
We are pleased to invite you to PIPENET Spray/Sprinkler – free online training webinar
View detail
PYTHA software: Working with Sandwich and using it to make thick fake...
24/01/2024
In this article, CIC will guide you to work with Sandwich to apply thick fake boxes in PYTHA software.
View detail
CIC summarizes production and business activities in 2023 and implementation plan for...
22/01/2024
On January 19, 2024, CIC Technology and Consulting Joint Stock Company held a Ceremony to summarize production and business activities in 2023 and Implementation Plan for 2024. Business results of 2023 exceeded the target target. marks an important milestone, demonstrating the development and transformation of CIC in the field of...
View detail
CIC participates in the 2024 occupational safety and hygiene training course
15/01/2024
On January 15, 2024, Construction Consulting and Safety Technical Inspection Company (Incosaf) implemented an occupational safety and hygiene training course for all employees of CIC Technology and Consulting Joint Stock Company.
View detail
Management solutions and optimization of METRON energy use in industries
11/01/2024
Metron is one of the effective solutions applied in managing and optimizing energy use in industrial factories.
View detail
The Ministry of Industry and Trade issued a circular guiding greenhouse gas...
05/01/2024
On December 27, the Ministry of Industry and Trade issued Circular No. 38/2023 guiding greenhouse gas inventory for sectors belonging to the industry and trade group such as steel, energy, coal mining...
View detail
Scope 1,2 and 3 greenhouse gas emissions according to GHG Protocol and...
05/01/2024
According to the GHG Protocol standard and ISO 14064 standard, greenhouse gas emission sources are divided into two main sources: direct emissions and indirect emissions, but each standard has a different division.
View detail
ZX300 – Wind measuring device using Lidar technology is trusted worldwide
04/01/2024
ZX300 is currently an wind measuring device using Lidar technology that is trusted worldwide.
View detail
Leaders of wind measurement equipment company ZXLidars visited and worked at CIC...
02/01/2024
Representatives of ZXLidars had a working session at CIC Company headquarters on December 13, 2023 on the occasion of their trip to Vietnam to attend Geotec Hanoi 2023.
View detail
CIC and CYPE organized webinar No. 3: "Implementing BIM in mechanical and...
28/12/2023
On January 11, 2024, CIC Company and CYPE Software Company organized online seminar No. 3 with the topic: "Implementing BIM in mechanical and electrical design with CYPE".
View detail
Green transformation of industry – The foundation for a roadmap to reduce...
28/12/2023
Solutions to reduce greenhouse gas emissions were mentioned at the Workshop "Green transformation of industry - Greenhouse gas inventory: Foundation for the roadmap to reduce emissions" recently held in Hanoi.
View detail
CIC participates in the GEOTEC HANOI 2023 International Conference
20/12/2023
From December 14 to December 15, 2023, CIC Company participated in the International Conference "Geotechnics for sustainable infrastructure development" - GEOTEC HANOI 2023.
View detail
CIC and Hexagon : Successfully opened a series of webinar in Vietnam
19/12/2023
Following the success of the C-level event held in Ho Chi Minh City in early August, on December 14, 2023, CIC and Hexagon software company continued to organize webinar No. participation of enterprises in the energy, oil and gas, electricity and construction sectors.
View detail
Organized a networking event: "Applying BIM to transportation infrastructure projects in Vietnam"...
12/12/2023
On December 7, 2023, CIC Company, GSI and Allplan software company successfully organized the workshop "Applying BIM to transportation infrastructure projects in Vietnam: Current status, trends and practical experiences ”.
View detail
Leaders of RadioDetection Company (UK) officially visited CIC Company
08/12/2023
On November 28, 2023, Mr. John Pimlott - Director of Radiodetection Asia - Pacific Region had an official working visit to CIC Technology and Consulting Joint Stock Company at its headquarters in Hanoi.
View detail
Invitation to attend GEOTEC Hanoi 2023 Exhibition
08/12/2023
CIC Technology and Consulting Joint Stock Company sends an invitation to attend GEOTEC Hanoi 2023 Exhibition.
View detail
Don't miss the event Applying BIM in Transport Infrastructure in Vietnam held...
28/11/2023
CIC Technology and Consulting Joint Stock Company respectfully invites customers to attend the event "Applying BIM to transportation infrastructure projects in Vietnam: Reality, trends and practical experiences" held at Hanoi on December 7, 2023.
View detail
CIC signed a cooperation agreement with HUTECH, sponsoring enjiCAD software for students...
22/11/2023
Recently, CIC Company has just signed a cooperation agreement and sponsored enjiCAD software for students of the Institute of Engineering and the Faculty of Construction - Ho Chi Minh City University of Technology (HUTECH).
View detail
CIC participates in the Vietnam Urban Sustainable Development Forum 2023
10/11/2023
On November 8, 2023, CIC Technology and Consulting Joint Stock Company participated in the Vietnam Urban Sustainable Development Forum 2023 with the topic Combining BIM and GIS in digital transformation for smart urban development.
View detail
Greenhouse gas emission reporting guide - A handbook for businesses
02/11/2023
The State Securities Commission (SSC) launched a handbook in coordination with the International Finance Corporation (IFC) to organize the launching ceremony of the Greenhouse Gas Emissions Reporting Guidebook.
View detail
ALLPLAN 2024 officially launched
31/10/2023
The latest version of Allplan - Allplan 2024 has officially launched and is ready to download today.
View detail
Promoting digitization in the Construction industry
06/10/2023
Top experts Allplan, Bluebeam, ArchiCAD... share and introduce comprehensive software solutions to optimize the design, construction, and project management processes.
View detail
Vietnam Solutions Day Seminar 2023
22/09/2023
Join the free in-person software seminar to meet our experts, get the latest insights and input into shaping the future of the product.
View detail
Don't Miss the Special Events for Construction in September
07/09/2023
A Special Conference on World-Building - Digital Transformation in the Architecture, Engineering, and Construction Industry to be Hosted by CIC and GSI Group in September this Year.
View detail
Copyright classification of Plaxis 2D, Plaxis 3D
22/08/2023
Both Plaxis 2D and Plaxis 3D software have three main copyright classifications. In this article, CIC will introduce each type to our valued readers.
View detail
Digital Transformation for Industry and Technology 2023
17/08/2023
On August 10, 2023, CIC and Hexagon successfully organized the event with the theme: "Digital Transformation for Industry and Technology - Insights Experts" at Sheraton Saigon, attracting the participation of top CEOs, CTOs, and CIOs in Vietnam.
View detail
CIC successfully organized a seminar: "Application of Plaxis Software in Underground Construction...
17/08/2023
On August 11, 2023, CIC Company and Bentley Corporation successfully organized a seminar in Ho Chi Minh City with the theme: “Application of Plaxis Software in Underground Construction Calculation”.
View detail
Understanding Net Zero and the Cement Industry's Race
08/08/2023
Net Zero represents the halt of global temperature rise. The cement industry is taking the lead in the Net Zero race in Vietnam.
View detail
The Carbon Credit Market – Development Path in Vietnam
08/08/2023
Building and developing the carbon credit market is a crucial task in Vietnam's current development trajectory.
View detail
Top 5 Most Popular Interior Design Styles
07/08/2023
Interior design style is the backbone of a home's space. Choosing a suitable interior design will enhance the aesthetics of the home, thereby reflecting the personality and character of the homeowner.
View detail
Why is it necessary to analyze and evaluate the life cycle of...
04/08/2023
Currently, LCA (Life cycle assessment) is an optimal and effective method for calculating emissions per unit of product. Measurement of environmental factors.
View detail
CYPE: A new opportunity for the Construction industry in Vietnam
03/08/2023
On July 27, 2023, CIC and CYPE Software company Spain successfully organized an online seminar titled "Cype-Comprehensive BIM Solution for the Construction Industry".
View detail
Environmental product declaration - EDP
03/08/2023
EDP, also known as Environmental Product Declaration, is an international certification that indicates the environmental performance of a product throughout its production and use.
View detail
Leapfrog Geo software: Outstanding features
31/07/2023
Leapfrog Geo with powerful tools allows geologists and mining professionals to create accurate 3D geological models.
View detail
Thua Thien-Hue: Applying BIM will replace traditional construction methods
25/07/2023
Many leaders, managers, and construction officials in Thua Thien - Hue province have received valuable information about the capabilities and benefits of applying BIM in construction management.
View detail
Son La: Applying BIM for drainage and wastewater treatment
25/07/2023
CIC Technology and Consulting JSC. is the leading unit in implementing the project "Application of information technology to build BIM models for the management of drainage and wastewater treatment projects in Son La city".
View detail
"Webinar: CYPE - Comprehensive BIM Solution for Construction"
25/07/2023
At the end of July 2023, in collaboration with CYPE, CIC JSC. is organizing an webinar :"CYPE - Comprehensive BIM Solution for the Construction Industry”.
View detail
Model conversion tool between PLAXIS 2D, SLOPE/W, and PLAXIS LE
21/07/2023
The PLAXIS 2D conversion tool helps users quickly open the same model as GeoStudio SLOPE/W or PLAXIS LE to perform limit equilibrium method (LEM) analysis.
View detail
What is the Life Cycle Assessment (LCA) evaluation method?
17/07/2023
LCA is a standardized method according to ISO 14067, which helps measure carbon footprint and continuously improve the impact of carbon emissions on the environment.
View detail
CSI releases the latest version of SAP2000 V25
12/07/2023
Recently, Computers and Structures, Inc (CSI) has released an upgraded version of SAP2000 with numerous new features.
View detail
What is Robot Underwater Inspection (ROV)? Types of current ROV
14/04/2023
ROV (Remotely operated underwater vehicle) is a robot specially designed to work underwater. The ROV is connected with cables for control, power supply, and data transmission.
View detail
CIC successfully held the 2023 General Meeting of Shareholders
10/04/2023
On the morning of April 7, CIC Consulting and Technology Joint Stock Company successfully held the 2023 Annual General Meeting of Shareholders at the 6th floor Hall of the Company. The meeting with the large presence of shareholders summed up the activities in 2022 and agreed on a number of...
View detail
CSI released the CSiXCAD software
27/02/2020
Under the success and effectiveness of CSIxRevit's application for BIM interaction model between ETABS and Autodesk Revit software
View detail
CIC completed and handed over the Eye tracking device: ETVision system of...
11/02/2020
On February 5th, 2020, CIC Technology and Consultancy Joint Stock Company completed and handed over of ETVision system of Argus Science (USA) to Viet Duc University, under the project "Procurement of equipment for EEIT (Phase 2) and equipment for Viet Duc Transport Research Center (VGTRC)
View detail
The seminar “Geotechnical solution applied Bentley Plaxis software 2019”
15/01/2020
The seminar “Geotechnical solution applied Bentley Plaxis software 2019” was held on December 5th 2019 by CIC Technology and Consultancy JSC in coordination with Bentley Systems, Incorporated.
View detail
CIC won the bid to provide Industry hazard analysis software PHAST for...
09/04/2019
PTSC M&C is the leading company in the field of oil and gas construction services, with its position and prestige of PTSC M&C, the company is always the pioneer in applying advanced management tools and quality standards system into production and business activities. This helps to confirm PTSC M&C's prestige...
View detail
Workshop: Smart Traffic Management Solution PTV OPTIMA at Hanoi Department of...
12/03/2019
On the 23rd of October in 2018, under the instruction from official dispatch No. 7792 VP-DT of Hanoi People's Committee, a workshop on Real-time Traffic Management PTV OPTIMA was held by Hanoi Department of Transport. Construction Informatics and Consultancy JSC (CIC) in coordination with PTV (Germany) presented and...
View detail
CIC and the Transportation Development and Strategy Institute (TDSI) completed handover and...
12/02/2019
On the 31st of October in 2018 CIC won the package: Supplying equipment for investigation of traffic safety – under the project: "Enhancing the capacity of information technology application in traffic safety statistics, investigation, survey and data analysis ”of Transportation Development and Strategy Institute (TDSI).
View detail
Chào 2019 - Công ty CIC vững bước phát triển
23/01/2019
Ngày 18/01/2019, Công ty CP tin học và tư vấn xây dựng (CIC) đã tổ chức Lễ tổng kết tình hình hoạt động sản xuất kinh doanh năm 2018 và phương hướng hoạt động 2019.
View detail
Lễ Kỉ niệm 28 năm thành lập Công ty CIC
02/12/2018
Nhân dịp kỷ niệm 28 năm ngày thành lập Công ty Cổ phần Tin học & Tư vấn xây dựng CIC (1990–2018), CIC long trọng tổ chức Lễ kỷ niệm vào ngày 27/11/2018 tại Hội trường 9A – Đào Tấn – Ba Đình - Hà Nội.
View detail
CIC và DNV GL kết hợp tổ chức Hội thảo "Những điểm...
16/10/2018
Mới đây, vào ngày 10/10/2018, tại khách sạn Rex Saigon, hội thảo mang tên “NHỮNG ĐIỂM MỚI TRONG PHÂN TÍCH DỮ LIỆU VÀ QUẢN LÝ RỦI RO” do Công ty Cổ phần Tin học và Tư vấn Xây dựng (CIC) phối hợp cùng hãng DNV GL (Na Uy) tổ chức...
View detail
Chương trình đào tạo Quốc tế Ứng dụng PLAXIS trong Địa...
04/03/2018
Chương trình đào tạo tại Tp. HCM ngày 20 – 21/03/2018: Ứng dụng phần mềm PLAXIS 2D giúp nâng cao kiến thức, sử dụng hiệu quả cho công tác tính toán địa kỹ thuật và nâng cao giải pháp cho các bài toán nền móng phức tạp: móng, hố đào,...
View detail
Hãng Sunrise System phát hành phiên bản mới PIPENET 1.9.0
01/02/2018
Phát triển mới nhất của PIPENET®, PIPENET phiên bản 1.9.0 có hơn 100 cải tiến bao gồm các mẫu, trình xem đồ thị được cải tiến và giao diện người dùng tinh gọn. Có nhiều cải tiến đáng kể làm cách mạng hóa trải nghiệm PIPENET. Đây là một bản...
View detail
6 Lý do nên chọn PLAXIS
05/07/2017
CIC là đại lý ủy quyền của hãng PLAXIS BV tại Việt Nam. Với các giải pháp phần mềm địa kỹ thuật PLAXIS 2D, PLAXIS 3D. dưới đây là 6 lý do người dùng nên chọn giải pháp của PLAXIS.
View detail
PTV ra mắt phiên bản mới của phần mềm VISSIM version 9...
10/03/2017
Phần mềm Vissim 9 phiên bản mới nhất của hãng PTV, giúp bạn hướng đến giải pháp tối ưu trong công tác mô phỏng, phân tích, xử lý các luồng giao thông đô thị.
View detail
News of Company
CIC Workshop: Applying OpenFlows Solutions for Secure, Safe, & Efficient Water Industry Development in Quang Ninh, Promoting Digital Transformation
As part of promoting digital transformation in Quang Ninh Province's water sector, CIC Technology and Consulting Joint Stock Company and...
Specialized
What is an Environmental Product Declaration (EPD)? Benefits and Implementation Process of EPD
An Environmental Product Declaration (EPD) is a document that publicly discloses the environmental impacts of a product during its manufacture...
CIC TECHNOLOGY & CONSULTANCY JSC.
Head Quarter: 37 Le Dai Hanh Street - Hai Ba Trung District - Hanoi City - Vietnam
Phone: (+84 24) 39 761 381 / (+84 24) 39 741 313
Email: info@cic.com.vn
Website: https://www.cic.com.vn
Ho Chi Minh Branch: 36 Nguyen Huy Luong Street - Ward 14 - Binh Thanh District - Ho Chi Minh City - Vietnam
Phone: (+84 28) 628 99 022 / (+84 28) 628 99 033
Email: cichcm@cic.com.vn
Products
Dịch vụ
Connect to facebook
